Phones answered 24/7Berkeley, CA(833) 490-5225
Free quote (833) 490-5225
Guide

How to check a water damage contractor before any work starts

How to check a water damage contractor in Berkeley on the CSLB lookup, which classification to look for and what to ask before any work begins.

Illustration for the guide "How to check a water damage contractor before any work starts" (Berkeley, CA)
Short answer

Look up any contractor's license on cslb.ca.gov, the Contractors State License Board lookup, and check the classifications it lists. Ask for the scope in writing, the names of the people who will do the work and what is excluded before a crew starts.

Key takeaways

  • The Contractors State License Board lookup at cslb.ca.gov shows a contractor's license status and its classifications.
  • The CSLB lists a C-61/D64 water damage remediation classification on licensed water damage firms.
  • This guide does not say whether cleanup-only work needs a license, so check the record and ask the contractor directly.
  • Get the scope in writing, including each stage, each removal and the readings that will end drying.
  • Ask who is on the job, who supervises them and how a change is approved.
  • Keep the license check and the written scope in the same file as your photographs and records.

Why does a license check come first?

A license check confirms that a contractor is licensed and shows the classifications it holds, before you rely on any promise made on the phone. It takes a few minutes and is worth doing before any work starts.

The Contractors State License Board is the state agency that licenses contractors in California. Its public lookup at cslb.ca.gov shows whether a license is active, what classifications it holds and what the record's status is. Check the record yourself rather than relying on a copy someone sends you.

A license check answers a narrow question: is this business licensed for the work it describes? It does not show the quality of the work, the outcome of an insurance claim or how the job will go. Use it as the first check among several, not as the only one.

Write down the license number and the date you checked it. A license that is active today can change, so the check belongs in your file with its date. Check again before the final stage of the work and before any final payment.

Which classification should a water damage firm show?

The CSLB lists a C-61/D64 water damage remediation classification on licensed water damage firms. A firm doing this work should be able to show that classification on its record.

On the CSLB record, the classification shown for water damage remediation is C-61/D64. A firm that describes itself as doing water damage restoration should be able to show that classification on its license record, or explain on the record what it holds instead.

Compare the classification with the work in the scope. If the scope includes structural repair, plumbing, roofing or electrical work, those trades may need their own classifications, so ask who holds each one and check each record on the same lookup.

A firm may name a subcontractor for part of the work. Ask for the subcontractor's license number and check it on the same lookup. The record in your file should show who is doing each part of the work, so that the chain of responsibility is clear from the start.

Does cleanup-only work need a license?

This guide does not state whether a license is required for cleanup-only work. Ask the contractor and check the CSLB record, and do not accept a claim that no license is needed without seeing it confirmed.

Whether a license is required for cleanup-only work is not confirmed by the sources used for this site, so this page makes no statement either way. Ask the contractor which classification covers the work in the scope, and ask where its view that a requirement does or does not apply comes from.

Whatever the rule turns out to be, the practical check is the same. Look up the business on cslb.ca.gov, match the name and license number on the lookup to the name on your contract and keep the result with its date.

If a firm offers to do the work without naming a license, or says none is needed without being able to point to a source, treat that as a reason to keep looking. A firm that is open about its license makes the check quick, and the check takes only a few minutes.

What should the written scope include?

A written scope lists each stage of the work, each removal, each equipment placement, the readings that will end drying and what is excluded. Without that list, a total is hard to compare with anything.

Ask for the scope to be divided into stages: emergency work, removal, drying and final cleaning. Each stage should say what will be done, where and why, and which readings or conditions will mark its end. A stage without an end point is hard to check at the end of the job.

The scope should also list what is excluded, such as repairs to plumbing, roofing, grading or finishes. Excluded work is often done by a different trade, and knowing where the scope ends prevents surprises when the drying is finished and the walls are open.

Ask how changes will be handled. A change should be described, its reason given and your approval recorded before the work is done. A contractor who will not put that process in writing is giving you a warning sign rather than an answer.

Who will be doing the work?

Ask who will be on site, who supervises them, whether they are employees or subcontractors and how you can reach a supervisor during the job.

Ask for the names of the people who will work in your home, and ask who supervises them. Ask whether they are employees of the firm or subcontractors, and ask for the license number of any subcontractor on the job so it can be checked on the same lookup.

Ask how you reach a supervisor during the work and how quickly they respond to a question. A specific answer is more useful than a general promise, and a good firm will name the person you can call and say when that person is usually available.

Ask about the insurance the firm carries for its own work. Ask for a copy of the certificate and check that it names the business you are hiring. This guide does not describe what any particular insurance covers, so read the certificate itself.

Ask whether the people on site have been trained for the specific tasks in the scope, such as moisture reading, removal of contaminated materials and the handling of sewage if it is present. A firm that can describe its training in plain terms gives you something to check against the work it does.

How should you compare two contractors?

Compare the license records, the written scopes and the answers to the same questions. A lower total is not a reason to hire a firm whose scope leaves out what matters.

Put the two written scopes side by side and check the same stages in the same order. A missing stage or a missing removal may explain a lower total, so compare the lines before you compare the bottom figure.

Ask each firm what would change its total. A useful answer names the readings, the materials and the access points that would move the figure. A vague answer such as it depends should be followed by a request to say what it depends on, in writing.

This site does not state prices for water damage work, and nothing on this page is a quote. The comparison is about the work, the license and the record, which is what makes a total worth comparing in the first place.

Compare how each firm handled the first call. A firm that asked about the source, the power and the rooms affected, and that explained what would happen next, gives you evidence of how it will work once it is on site. A firm that pushed for a number before any walkthrough has told you something about how changes will be priced later.

What does a walkthrough before work begins look like?

A walkthrough lets the crew see the water line, read the materials and agree the first steps with you. You should leave it with a written list of what was found and what happens next.

During the walkthrough the technician traces the water, marks the high-water line and takes readings in the framing, subfloor and drywall. Ask to see the readings, and ask what each one means for the scope. A walkthrough that ends without a written list is a walkthrough you cannot check later.

Ask the technician to point out what will be removed, what will be dried in place and what is still unknown. The unknowns matter as much as the knowns, because they are where a scope is most likely to change, and you should know in advance how a change would be raised with you.

What do you do after you hire a contractor?

Keep the license check, the written scope, the photographs and the readings in one file, and check the license again before the final stage of the work.

Keep the CSLB record with the date you checked it. Add the written scope, each change you approved and the readings from each visit. The file will answer most questions that a later reviewer or insurer is likely to ask about the work.

When you call Berkeley Water Damage Restoration, someone picks up and takes the details, and the next step is explained on the call. Call (833) 490-5225 with questions about the scope or the first steps, and ask the firm doing the work to confirm its own license number in writing.

Check the license again before the final stage and before final payment. A record that was active at the start should still be active at the end, and the check takes only a few minutes.

Frequently asked questions

Where do I check a contractor's license in California?

On the Contractors State License Board lookup at cslb.ca.gov. Enter the license number or the business name, and read the status and classifications shown on the record.

Does a water damage firm need a specific classification?

The CSLB lists a C-61/D64 water damage remediation classification on licensed water damage firms. Whether that classification is required for every kind of cleanup-only job is not confirmed on this site, so ask the firm and check its record.

What if someone says no license is needed?

Ask them to show the requirement, and check the CSLB record yourself. This guide does not state a rule for cleanup-only work, so an unsupported claim should not be accepted in its place.

Who should I ask about the license of the firm doing the work?

Ask the firm that does the work for its license number and its classifications in writing, then check both on cslb.ca.gov before work begins. Keep the written answer with the rest of your file.

This guide is general information for Alameda County homeowners, not a substitute for an on-site inspection. Prices are estimates. See our disclaimer.

Still stuck? We pick up 24/7.

If it's an emergency, call now. For non-urgent help, send the form and we'll call you back.

Keep reading

More guides

WhatsApp