The Hayward Fault runs through the East Bay hills, and shaking can shift older hillside foundations enough to part water and gas connections. After a quake, check for gas first, then shut the water off if a line is broken, and call for help before anyone enters a damaged area.
Key takeaways
- The California Geological Survey places the Hayward Fault along the East Bay hills, and the fault also runs through the UC Berkeley campus.
- Older hillside homes can shift off their foundations in a large quake and sever gas and water connections.
- If you smell gas or hear hissing, leave and call the gas utility from outside before doing anything else.
- Shut the water main if a line is broken, then check the outdoor meter and any visible supply pipe.
- Look for wet soil, pooling near the foundation and a sudden drop in pressure at the taps.
- Photograph any damage before moving anything, and keep the record with your insurance papers.
Where does the Hayward Fault run through Berkeley?
The Hayward Fault runs along the East Bay hills, and the hillside neighborhoods above Berkeley sit within that belt of ground. Its shaking is the reason the hills carry a seismic risk that flat neighborhoods do not share to the same degree.
The California Geological Survey describes the Hayward Fault as running along the East Bay hills, and the hillside neighborhoods above Berkeley sit within that belt of ground. A fault mapped that close to homes is a standing reason to think about how the house connects to the street, not only how it sits on its lot.
UC Berkeley's alumni magazine reports that the fault runs through the campus, passing California Memorial Stadium. That means the risk is not confined to remote hillside streets. The ground under the flats and the foothills is part of the same system, and shaking does not stop at the edge of a neighborhood.
Shaking is what matters for a house, not the fault line on a map. Ground movement can shift foundations, loosen connections and crack the pipes and fittings that run between the house and the street. Older construction is the most likely to show that damage, because it was built before many of the connections now used were standard.
Why are older hillside homes more exposed?
Older hillside homes often sit on raised foundations, piers and crawl spaces, and their connections cross that movement. The combination of age and slope makes a shift more likely to reach the utility lines.
Berkeley's hillside stock includes many pre-war houses on raised foundations. A house that sits on piers or a short stem wall moves differently from one on a continuous slab, and the utility lines that cross the gap between the house and the street move with it, sometimes in opposite directions.
The 1990 Census figure cited on this site puts roughly half of Berkeley's housing units before 1940, and much of the hill stock is that old. Age does not decide whether a line breaks in a quake, but older connections have had decades of settling and seasonal movement to absorb, and some of that movement has already left its mark.
The steepness matters too. A house on a slope can slide a little relative to its foundation when the ground moves, and water and gas lines that run down the slope have less slack than lines on flat ground. A connection that was tight to begin with can part under the same movement that a looser line would absorb.
What do you check first after the shaking stops?
Check for gas first, then for water. Confirm the house is safe to enter, then look for leaks at the meter, the water heater, the outdoor lines and the foundation.
If you smell gas, or hear hissing near a gas line, leave the house, keep others away and call the gas utility from outside. Do not run electrical switches or light a match in a room where you smell gas. Gas is the first check, before any look at water, because it can turn a water problem into a fire problem in minutes.
Then look at the water. Find the main valve and close it if a line is broken or you cannot tell where the water is coming from. Check the outdoor meter and any exposed supply pipe for leaks, and listen for running water inside walls. A sudden drop in pressure at the taps is also a sign that a line has parted somewhere between the meter and the house.
Look for wet soil or pooling near the foundation, a crack that did not exist before the quake, or a stain spreading on a wall. Those signs point to a line that is still losing water, and they should be recorded before anything is changed or repaired.
What should you photograph and write down?
Photographs of the broken line, the foundation, cracks and wet areas are the first part of the record. Note the time of the shaking and the first signs of water or gas.
Take photographs of the outdoor meter, the visible pipe, any cracks in the foundation and the wet soil or flooring. Date each photograph and keep the original files. If it is safe to do so, show the position of the main valve as you found it, before you change it.
Write down the time of the shaking, the time you first noticed water or gas, what you did in response and who you called. A short written account is more useful later than a clear memory of a stressful morning, and it helps any crew or insurer place the loss in time.
Keep any damaged items until the crew and your insurer have seen them, unless safety requires removal. A list of damaged items with their locations is helpful, and the crew's readings can be added to it on each visit.
When does a broken line need a crew right away?
A line that is still losing water, water that reaches the house or a wet area that does not dry needs a crew at once. Waiting lets a small leak undermine a foundation or wet framing.
Call (833) 490-5225 if water is still coming in after the main is closed, if water has reached the floor or the crawl space, or if you cannot find the source. Someone picks up at any hour, takes the details and explains the first steps on the phone, so you know what to do while you wait.
Do not enter a crawl space or a damaged section of the foundation to look for the leak if it appears unsafe. A crew can read moisture from accessible points before it opens anything, and it can decide when the structure is safe to enter, which a homeowner cannot judge from inside a shaken house.
After a large quake, many people call at once. If the call takes time to reach a person, keep your notes and photographs ready so the first steps can start as soon as the call is answered, and do not wait for the line to clear before closing the main valve.
What should you do in the days after a quake?
Keep the house dry where it can be, keep the record current and watch for slow changes that the shaking may have caused. Damage can show up days later as a crack that widens or a stain that spreads.
Check the house each day for new cracks, a door that sticks where it did not before, a wet patch that was not there yesterday and any change in the sound of running water. A slow leak can run for days before it becomes obvious, so a daily look is the simplest early warning.
Keep the damaged items off wet floors, move the most valuable papers and electronics to a dry room, and keep a dated log of what changed each day. The log is the record a crew or an insurer will ask for, and it is far easier to keep as you go than to rebuild a week later.
How do hillside homes reduce damage from the next quake?
Flexible connections, shutoff valves that are easy to reach and a known location for the main reduce the damage a quake can do. Those are steps a homeowner can plan with a plumber or a licensed contractor.
Make sure everyone in the house knows where the main water valve is and how it turns. A valve that is hard to reach or seized is a problem during a quake, when minutes count and the ground may be slippery underfoot. Test the valve once a year so it turns freely.
A plumber can discuss flexible connectors where supply lines cross the foundation and can check whether the gas shutoff is accessible. A licensed contractor can also look at the foundation and the connections together, which is more useful than a single-trade look at one section.
This guide does not state a cost or a schedule for those steps. It describes what to ask about, so the conversation starts from the right place and the answers can be written down and compared.
How does earthquake damage fit with an insurance claim?
Earthquake damage is often handled under a different policy or endorsement from ordinary water damage. Ask your insurer which coverage applies and keep the records that support each part of the loss.
Many homeowners policies treat earthquake loss differently from water loss, and some require a separate earthquake policy. This guide does not say how any policy responds. Read the declarations page and ask your insurer in writing which coverage applies to each part of the damage.
Keep the same records you would keep after any water loss: dated photographs, notes, readings from each visit and a list of items removed. Those records help whichever coverage applies, and they make the claim easier to explain to anyone who reviews it.
The California Department of Insurance (insurance.ca.gov) is the state regulator for insurers. Its name is given here so you know where to direct a question about an insurer's handling of a claim, and nothing more is said about that process on this page.
Frequently asked questions
Is every hillside house at risk of a broken water line in a quake?
No. Risk depends on the foundation, the age of the house, the slope and the route of the connections. The only way to know your own house is an inspection by someone qualified to read it.
Should I turn off the gas myself after a quake?
Only if you smell gas or hear a leak, and then leave the house and call the gas utility from outside. Do not light a flame or flip switches in a room where you smell gas.
Will a crew come out right after an earthquake?
Call and describe what you see. Phones are answered at any hour. Arrival times are not promised, and the crew decides the order of work based on the conditions it finds when it arrives.
Does the Hayward Fault affect every part of Berkeley equally?
No. Shaking and ground conditions differ from place to place, and this guide does not map risk street by street. Ask a qualified inspector about your own lot before deciding what to change.
This guide is general information for Alameda County homeowners, not a substitute for an on-site inspection. Prices are estimates. See our disclaimer.